Hoyt St 6361 Burnside Motors for DIY eskate builders.
INDUSTRY LEADING PERFORMANCE: Magnetic field simulation and years of field testing utilized to optimize power-output efficiency and torque-curves for single-rotor specific applications. The new XF Generation 3 Brushless Motor Series produce industry-leading performance and are built to the highest-quality standards and manufacturing technologies available; including proprietary techniques never before introduced. All XF Gen3 versions are high-grade, Japanese brand quad-bearing supported for exceptional durability and vibration-free, smooth operation.
OPTIMIZED STATOR CONSTRUCTION: Stator construction uses the highest-grade, 0.2 mm silicon steel laminations and military-spec, Polyimide ultra-high temperature (240°C/464°F) windings for optimum efficiency and power transfer. Permanent bond to the stator is achieved with a Kevlar-tie wrap around all stator teeth and vacuum-pulled epoxy coating to reduce chance of winding failures.
MAGNET BELL CONSTRUCTION: All XF Gen3 Series motors use true-grade, ultra-high temperature rated N45UH Neodymium sintered-magnets (10- Pole, 85% magnetic surface coverage) for industry-leading performance. An upper CNC-machined magnet retaining ring, dedicated slots, and 360° epoxy bonds are incorporated at each magnet location to secure a permanent connection to the motor housing for unparalleled, failure-free operation.
HIGH VOLUME CENTRIFUGAL FAN: The XF Gen3 Fan design is further optimized for high-volume airflow at minimal amperage-draw; providing a cool-running, 3D competition-ready motor, even under the hardest and most demanding riding styles and weather conditions.
SILICON WIRE POWERED LEADS: High-temperature (200°C/392°F), silicon-wire power leads come pre-soldered with 24K male bullet connectors and rubber exit-wire gasket protection for easy installation.
=========================================
6361s: Military Grade Brushless Motor with Hall Sensor, designed and engineering in Oregon, USA: 63x61mm, 750g.
Max Continuous Power: 3400W
Max Continuous Current: 68A
Rated Voltage: 50.4V (12S)
Kv: 180
Shaft Diameter: 8mm
Stall Torque: 3Nm
Max RPM: 7600 RPM
Hall-effect sensored
Bearings: 2x dual-stacked bearings with permanently bonded and internally sealed oversized bearings ensuring long life and smooth operation.
Windings: vacuum pulled double epoxy dip polyimide ultra-high temp ensuring electrical insulation and vibration resistance.
Stators lamination: high grade Japanese 0.2mm stamped silicone steel plates.
Max temperature: 180ºC
Magnets: N45UH Neodymium sintered.
Minimal Magnetic Flux Loss: majority of the magnetic field contained within the motor enabling maximum rotor:stator interaction, meaning the magnetic field is spent propelling you forward, not lost outside the can picking up metal shavings.
Free Shipping on Domestic Orders. For international shipping, please email hoytskate@hoytskate.com for shipping quote and instructions.
